REVO fastest gear ratio, 10.1: 1 Over 105cm meter per rotation of handle. The arrival of high-speed fishing. Equipped with large diameter brass gear, power stack carbon drag close to full lock, and IB brake. For shallow water vibration, minnow speed fishing, top water pencil, frog, Texas speed recovery, rockfish!


X-CRAFTIC frame and crank side plate

The aluminum frame is designed to the limit while reducing the strength without reducing the strength.

Material setting considering tough use in salt.

The side plate is also made of aluminum and is designed to be sturdy, allowing for reliable reeling.

Infini brake system

A centrifugal brake that uses a spring mechanism for each block of the 6-point brake system,

“Infini brake system” that can be used with a high-performance magnet brake system.

It is safe even when you are worried about line troubles, such as headwinds. Centrifugal brake with one reel

A brake system that can take advantage of the advantages of each magnet brake.

Power stack carbon matrix drag

Normally, when there are two drag washers, only two sides are effective.

However, by adding irregularities on the outside diameter of the drag washer,

One side, three side effect. It offers excellent drag performance as well as maximum drag.


D2 gear design large caliber brass gear

Equipped with a strong large-diameter brass gear, durability and strength have been improved,

Fighting with big game can be done with strong gear.

Dura clutch

The operating section has been thoroughly redesigned, resulting in a clutch structure that is easy to disengage and has improved durability.

φ33mm aluminum machine cut spool

The amount of bobbin conscious of big lake and big fish that stocks 16lb-115m.

Recessed reel foot
The split reel foot pushes down the spool, making it even more low-profile.

Height from the foot is about 40mm. Provides comfortable palming performance.

90mm crank carbon handle + big flat EVA knob

For a lightweight, high power 90mm handle. A large flat knob made of EVA material that is lightweight and easy to grip.

Articulated side plate

The articulated side plate prevents loss due to falling when adjusting the brake.

Salt Shield TM pinion bearing

By adopting a newly developed ball bearing with a water-repellent coating on the entire inside and outside,

Dramatically reduced salt-gami phenomena that cause abnormal noise.

The rotary feel and durability have been greatly improved.

It is adopted for the pinion gear section where salt crystals are most likely to remain on the double-axis reel.

Product features

  • 208 g of own weight
  • Gear ratio 10.1: 1 Rocket gear ratio
  • Infini brake system
  • Power stack carbon matrix drag
  • D2 gear design
  • Dura gear large diameter brass gear
  • High durability X-Craftic aluminum frame
  • Salt shield pinion BB
  • 33mm spool diameter
  • 90mm carbon handle & big flat EVA knob
  • Gull wing side plate
  • 16lb-115m
  • 10/1 bearing