REVO ULTRACAST BF8 (Revo Ultracast BF8)

Dura metal frame

The aluminum frame is designed to the utmost while focusing on weight reduction without reducing strength.

Material setting considering tough use in salt.

 

Salt Shield TM Pinion Bearing

By adopting a newly developed ball bearing with a water-repellent coat applied to the entire inside and outside, the salt shaving phenomenon that causes abnormal rotation noise is drastically reduced.

We have succeeded in greatly improving the rotation feel and durability. It is used for the pinion gear part where salt crystals are most likely to remain on the dual-axis reel.

Magtrax III Brake System

Uses a unit with 5 magnet pockets for 3 mm thickness and 5 for 1.5 mm thickness.

Fine adjustment is possible according to the characteristics of the user’s casting and the condition of the rod.

It is possible to cope with the air resistance of a wide variety of light lures that have been advancing in recent years.

As standard, 5 pieces of 3mm and 5 pieces of 1.5mm are installed, and the magnet can be removed if you like.

In addition, the surface area of ​​the spool brake plate has been increased to improve the efficiency of the magnetic force.

Extra lightweight φ32mm spool made of extra super duralumin

While analyzing the strength, the thoroughly lightweight spool that does not have an extra mechanism is

Due to the synergistic effect with the Magtrax brake, a different dimension of cast feel and casting performance was obtained.

 

Recessed reel foot

The split reel foot pushes the spool downwards, enabling further low pro.

The height from the foot is about 38 mm. Provides comfortable palming performance.

Big Flat EVA Knob & 90mm Crank Handle

A large EVA flat knob and a long 90mm aluminum crank handle arm that can be firmly gripped are adopted so that even if an unexpected big game comes.

Soft clutch

The clutch mechanism has been reviewed from the beginning to realize a soft clutch with good operating performance.

The degree of fatigue caused by repeated operations throughout the day can be reduced.

 

Super Free　
HPCR-BB

Miniaturization of ball bearings is a means of reducing resistance, but it is vulnerable to load.

Abu Garcia reviewed the design of the ball bearing groove of the bearing and succeeded in developing a ball bearing of the conventional size with low rotational resistance.

We sought long-distance casting performance in micro jig flats and jig head casting.

Carbon Matrix Drag & Drag Clicker

By adopting Abu Garcia’s original carbon matrix drag washer, it is possible to apply higher drag force while maintaining smooth performance in a wide range.

By introducing a clicker, it is possible to grasp the speed drawn from the drag and communicate while being aware of the line break.

Lure keeper

Equipped with a lure keeper that is useful for moving small places. It is possible to hang a nail on the protrusion and pull it out.

At the same time, if you store the line through the half-moon-shaped hole, it will be useful when storing as a function of the line keeper.