| Gear ratio | 5.2: 1 |
|---|---|
| Practical drag power | 29.4N / 3.0kg * N (Newton) is a unit to express force, 1kg = 9.8N. |
| Own weight (g) | 260g |
| Maximum winding length (cm) | 73cm (1 turn per cm / handle) |
| Number of bearings | 10/1 (stainless steel / ceramic) |
| Thread amount | Nylon No.2 (8lb) -170m, No.2.5 (10lb) -150m, No.3 (12lb) -120m |
| price | Offered at Auction Only |
-
* Production of this product has ended. (May 2019)
Shape follows function.
The Opus 1 Limited is extremely rare and was offered by Auction only at the Japan Tackle Shows. It was produced in 4 different colors ( Orange, Red, Green, Blue ) in quantities of only 5 of each color. It came fitted with a special skeletonized double handle and shallow spool.
The primary requirements for Opus-1 were robustness and corrosion resistance. The material of the reel body is not magnesium alloy, which is often used for weight reduction, but aluminum alloy with excellent strength and durability.
On the other hand, other metal materials such as titanium alloy and stainless steel are actively adopted for the handle and other parts according to the characteristics required for each part, to balance weight balance and strength, which are major elements of functionality I am planning.
In terms of function, we adopted a high precision drive gear of forged aluminum alloy, stainless ball bearing and ceramic ball bearing with special rust prevention treatment to realize reliable and smooth rotation which is the most important function of the reel. .
Many other features have been carefully and carefully stored in this small frame. A tool that will not get tired even after years and does not make you feel old. Please feel the best balance and perfection that the veteran craftsman has built up with years of experience and intuition.
Details and features
- EGV cut line roller
- Employs an EG original V-cut line roller that minimizes thread twist that causes thread cling on the tip of a rod or guide.
-
- Metal bridge drag knob
- The drag knob with the edge is designed so that you can instantly adjust the drag with your gloved hand.
-
- Super duralumin spool ring
- The spool ring, which is easy to be scratched, is made of ultra-duralumin, which is light and hard, coated with titanium.
-
- Aluminum alloy die-cast body rotor
- The body and rotor, the main parts, use aluminum alloy die-casting with excellent strength and durability. Furthermore, it is anodized and has increased corrosion resistance through anti-rust coating.
-
- Double stopper one-way clutch (PAT.P)
- With a double countermeasure structure, the stopper works reliably in any situation to prevent slippage.
-
- Specialized tool
- ● Exclusive hex wrench
Large: 3mm Medium: 2.5mm Small: 2mm
● Exclusive wrench
-
- Rust-proof stainless steel ball bearing
- Rust-proof stainless steel ball bearings are resistant to rust and maintain smooth rotation even when used in salt water.
-
- Ceramic ball bearing
- A ceramic ball bearing with high surface hardness and excellent wear resistance is used for the handle shaft (side cover side), which places a load during winding, with an emphasis on durability.
-
- High precision forged drive gear
- Drive gears that require strength and durability use forged aluminum alloy. Anodized to increase rust prevention.
-
- Titanium alloy bail, main shaft
- To increase durability, the bail and main shaft adopt titanium alloy and are further coated with titanium.
-
- 4-point main shaft
- The four-point support structure that receives the shaft even at the end of the body prevents shaft shake, rattling, etc., and increases durability.
-
- Wound shape adjustment washer
- Adjustment washers are included so that even if there is a difference in yarn diameter or variation, a flat winding can be obtained.
-
- Single plate wide area drag washer
- This is a high-performance drag that uses a large area washer to allow a very smooth line to start.
-
- Other
- ■ Aluminum alloy forged spool
■ Duralumin handle arm
■ Aluminum alloy side cover
■ Aluminum alloy press bail arm
■ Aluminum alloy forged line slider
■ With serial number
Description
Please Note:
Many of the descriptions have been translated using Google translate. jdmfishing.com has modified some of these to better accommodate the reader and will continue to improve upon this as we move forward.
Related products
Spinning
Spinning
Spinning
Spinning