ROXANI POWERSHOOTER

Filter

Released in May 2018

* As this is an image, it may differ from the actual product.

Equipped with cutting edge design and power handle! Power fishing model with deep spool that inherits the REVO gene

* As this is an image, it may differ from the actual product.

 

20180129ROXANI_pop_bc.jpg

 

 

Equipped with cutting edge design and power handle! Power fishing model with deep spool that inherits the REVO gene

 

The robust Dura metal frame firmly supports the internal mechanism, and the salt shield pinion BB is installed for a wide range of applications from fresh water to salt water. Deep spool 20lb-100m line capacity for bass and rockfish with large plugs.

 

 

 

 

* It was found that there was an error in a part of the instruction manual of ROX ANI POWER SHOOTER. Click here for details.

Feature

Dura metal frameThe aluminum frame focuses on weight reduction without reducing strength

Extreme design.

Material setting considering tough use in salt.

 

Infini brake system

This time, ROX ANI is equipped with 10 magnets and 4 centrifugal brake blocks even in the Infini brake system.

Brake settings are possible for anyone who casts. Centrifugal brake casters strengthen the centrifugal block

By strengthening the magnet brake, the casters of the magnet brake group can freely feel their favorite feeling.

Of course, by using it together, it became possible to cast under all wind conditions.

Centrifugal brake has two types of weights. Blue is stronger and white is weaker.

High durability Dura gear brass gear & high strength brass gear shaft

High-strength brass gear for drive system to support big fish

A high-strength brass gear shaft is used for the support shaft.

Setting assuming forcible power winding.

Backup ratchet

By using not only the one-way bearing at the base of the handle but also the ratchet type backup ratchet

In case of a big game.

Dura clutch

Thorough review of the moving part, easy to cut,

It has a clutch structure with improved durability.

Aluminum forged φ35mm deep spool

Thick thread stock is essential to fight big fish.

High-strength aluminum forged spool with φ35mm to secure daily line capacity 20lb-100m

It was adopted.

Assuming that you want to use 16lb-100m, set a lower winding guideline on the side of the spool.

The speed merit of the maximum spool diameter can be maximized.

Recessed reel foot
The split reel foot pushes the spool downwards, enabling further low pro.

The height from the foot is about 40 mm. Provides comfortable palming performance.

Carbon Matrix Drag & Drag Clicker

By adopting Abu Garcia’s original carbon matrix drag washer,

It is possible to apply higher drag force while maintaining smooth performance in a wide range.

By introducing a clicker, you can grasp the speed drawn from the drag and

It is possible to communicate while being aware of line breaks.

Lightweight EVA middle round knob & 95mm long 4mm thick crank handle arm

A round type EVA knob is attached to the crank handle that uses 95 mm long and 4 mm thick aluminum.

Corresponds to the forcible fight of big fish.

Lure keeper

Equipped with a lure keeper that is useful for moving small places.

It is possible to hang a nail on the protrusion and pull it out.

At the same time, if you store it through the line in the half-moon shaped hole,

Useful for storage as a function of the line keeper.

 

Salt Shield TM Pinion Bearing

By adopting a newly developed ball bearing with a water-repellent coat applied to the entire inside and outside,

The salt shaving phenomenon that causes abnormal rotation noise is drastically reduced.

We have succeeded in greatly improving the rotation feel and durability.

It is used for the pinion gear part where salt crystals are most likely to remain on the dual-axis reel.

Product features

  • Own weight 242g
  • Infini brake system
  • High strength brass gear shaft
  • 95mm long 4mm thick crank handle arm
  • Salt Shield Pinion BB
  • Carbon Matrix Drag & Drag Clicker
  • Dyura metal frame
  • High durability Dura gear Brass gear
  • Aluminum forged φ35mm deep spool
  • Lightweight EVA middle round knob
  • HPCR ball bearing
  • Lure keeper
Description
Product code JAN / UPC product name Own weight (g) Gear ratio Maximum line winding (cm) Maximum drag force (Kg) Line capacity / approx. 0.33mm / approx. 16lb Line capacity / approx. 0.37mm / approx. 20lb Line capacity / approx. 0.405mm / approx. 25lb Ball / Roller Bearing Manufacturer’s desired body price (excluding tax)
1487509 036282963603 ROXANI POWER SHOOTER 242 8.0: 1 88 7 125m 100m 85m 4/1 ¥ 20,000
1487510 036282963610 ROXANI POWER SHOOTER-L 242 8.0: 1 88 7 125m 100m 85m 4/1 ¥ 20,000
Please Note:
Many of the descriptions have been translated using Google translate. jdmfishing.com has modified some of these to better accommodate the reader and will continue to improve upon this as we move forward.

Related products

Roxani

ROXANI BF8

Roxani

ROXANI 7/8