It is the light and shallow spool useful for 12 ALDEBARAN BFS XG.
It will help you cast lightweight lures.
You can select either magnetic brake or centrifugal brake to use with this spool.
Regarding Brake System selection, if you want to use:
– magnetic brake, select “with Microcast Brake ALD1224K”.
– Avail centrifugal brake, select “with 4P-Brake ALD12”.
– And if you can remove SHIMANO original SVS(centrifugal brake) unit from the original spool, and you want to reuse it with this new spool, select “Not Necessary”.
Avail products equipped on 12 ALDEBARAN BFS XG in the photo
– Microcast Spool ALD1224R RED
– Star Drag SD-ALD12-A RED
– Swept Handle for SHIMANO (HO-SH-STA) 85mm BLACK
– [Avail] Handle Lock Nut M7/Left BLACK
– [Avail] Wood Handle Knob (Black Ebony)
– GM Handle Knob Cap (Without hole) RED
Microcast Brake ALD1224K
Microcast Brake ALD1224K
* This is a special item useful only for Microcast Spool ALD1224R.
5 neodymium magnet (4mm×4mm) comes with this magnetic brake.
The brake force can be varied by the number of the magnet.
* This item is not compatible with any other Microcast Spools.
How to install the Magnet Brake
・ N pole and S pole should be placed alternately next to each other.
・ There are 10 installation holes of the magnets on the brake unit. If you want to make the brake work well, put magnets on the holes without leaving the interval.
・ When removing magnets from the unit, attract the magnets with iron stuff such as a wrench and pull them out.
・ Make the magnet work weaker by reducing the number, make the magnet work stronger by adding more.
・ If you would like to put more than five magnets, please contact us to offer you.
Colors
BLACK
RED
PURPLE (ROYAL PURPLE)
SKY BLUE
GOLD
Spec
Material
Spool: Extra Super Duralumin
Spool Shaft: Extra Super Duralumin
Compatibility
12 ALDEBARAN BFS XG
Weight
SHIMANO original: approx. 9.9g (without SVS)
Microcast Spool ALD1224R: approx. 6.3g
Regarding spool
reduced as much as possible for a bite line, but we have to change the gap between the shape of the reel frame, there is a risk that when not to use an extremely thin line cause of biting line so be careful Please give me.
Because in case you accidentally bite the line will be difficult to remove the spool, be sure to remove the spool from to eliminate the biting line.
Line Capacity
Spool/10Lb φ0.260mm
ALD1224R/40m
Spool/8Lb φ0.235mm
ALD1224R/50m
Spool/6Lb φ0.205mm
ALD1224R/60m
* The numerical value mentioned above is the result of measuring by winding nylon line up to the edge of spool rim.
How to use SVS Puller
Take out the spool from your reel.
After splitting off from spool, remove SVS from the Puller by turning the screw anticlockwise.
* As thumbing on the spool rim, there is a possibility that the anodized aluminum is peeled off by friction. Please try to thumb on the line surface of the spool.
* When winding the spool on the line, will be the cause of the damage is too over a period of strong tension.
In particular, when winding the line with growth, such as nylon line, please use the wound to loosen the tension.
